Order shipment will resume Monday, June 20th

Clearance sale. Special price!

The Arduino Ethernet is a microcontroller board based on the ATmega328 (datasheet). It has 14 digital input/output pins, 6 analog inputs, a 16 MHz crystal oscillator, a RJ45 connection, a power jack, an ICSP header, and a reset button.

NB: Pins 10, 11, 12 and 13 are reserved for interfacing with the Ethernet module and should not be used otherwise. This reduces the number of available pins to 9, with 4 available as PWM outputs.

An optional Power over Ethernet module can be added to the board as well.

The Ethernet differs from other boards in that it does not have an onboard USB-to-serial driver chip, but has a Wiznet Ethernet interface. This is the same interface found on the Ethernet shield.

An onboard microSD card reader, which can be used to store files for serving over the network, is accessible through the SD Library. Pin 10 is reserved for the Wiznet interface, SS for the SD card is on Pin 4.

The 6-pin serial programming header is compatible with the USB Serial adapter and also with the FTDI USB cables. It features support for automatic reset, allowing sketches to be uploaded without pressing the reset button on the board. When plugged into a USB to Serial adapter, the Arduino Ethernet is powered from the adapter.

Part List

  • 1x Arduino Ethernet Shield

Write a question

Please login or register to review

Write a review

Please login or register to review

Arduino Ethernet R3 Without PoE

  • Arduino
  • Arduino Ethernet R3 Without PoE
  • --
  • $ CAD55.43 $ CAD10.31
  • CAD 232.02 Left For Free Shipping

Related Products

Arduino Leonardo no Headers

Arduino Leonardo no Headers

The Leonardo differs from all preceding boards in that the ATmega32u4 has built-in USB communication..

$ CAD12.25 $ CAD29.00

TSOP34156 IR detector module 56kHz

TSOP34156 IR detector module 56kHz

The Vishay TSOP34156 Infra Red is a great receiver for IR-based remote-control projects. It is optim..

$ CAD1.93 $ CAD3.22

Tags: arduino